Futaba 10CH 2.4GHz Radio Set
The 10C is a modular system, yet offers response superior to most “dedicated” systems. Why? Because response doesn’t depend on whether your module is built-in or modular. It depends on whether your signal starts in analog or digital form.
Converting a signal from analog to digital form requires processing time — what you experience as lag. The 10C, on the other hand, was designed with a totally digital data stream. The signal starts digital and stays digital. Since no additional processing is needed, there’s no lag, either — just virtually instantaneous, real-time response.
And because the 10C is modular, you can use the TM-10 module to fly 2.4GHz-equipped aircraft…or replace it with a 50 or 72MHz module, and fly existing models without added equipment or expense.
10C System Overview:
Big, 160 x 72 LCD with backlighting, adjustable contrast & auto-off
Dial ‘n Key™ programming w/joystick navigation
15-Model memory (expandable w/optional CamPACs)
10-character user name
10-character model name
2048 resolution in FASST 10-channel mode
Basic & Advanced menus
Enhanced airplane, heli & glider software
Smart Switch Technology™ (SST) — Logic Switches allow you to activate a function when specified switch and/or stick positions occur
Up/down on/off timer (activate by stick or switch)
Tracks service hours for radio and models
Mode 1-4 selectable (Modes 3 & 4 programmable)
Assignable functions/switches
Auxiliary channel screen — for 1-step function/switch assignment & eliminating unused auxiliary functions
2 proportional slider switches
Digital trims on all 4 main channels
Trim memory & sub-trims (all channels)
Adjustable trim steps (1-40)
Fail-safe, servo reversing & EPA
“Full Functionality” trainer system (cord required)
Flap switch (3-position)
Retract switch
Rotary Dial (3)
Adjustable Throttle Cut/Idle Down
Sticks w/length & tension adjustments
Servo cycle w/bar graph displays
Constant trim, voltage, name and timer display
10C Specifics:
Advanced Airplane Menu
8 Programmable Mixes (4 linear/ (4) w/5-point curves)
9 Factory-Defined Mixes: Elevator-Flap; Ailvator (for dual elevator servos); Throttle-Needle; Aileron Differential; Flaperon; V-Tail; Elevon; Snap Roll; and Air Brake w/elevator delay
Dual/Triple rates (4 ch.)
Exponential (4 ch.)
Idle down
Throttle cut
Throttle delay
Throttle Hold & Idle-up w/delay
2 independent gyro settings
7-point throttle curve
Flap trim
Advanced Heli Menu
The 10C accepts separate gyro sensitivity, governor speed and servo travel rates for up to 4 flight modes — and automatically changes all three when the flight mode changes.
6 Programmable Mixes (4 linear/ (2) 5-point curves)
8 Factory-Defined Mixes: Hover-Throttle; Hover-Pitch; Throttle-Needle; Governor; Offset; Revo (5-pt.); Delay; and Throttle Mix (ail/ele/rdr)
Gyro menu
8 swash plate types w/graphics
Swash Plate AFR
(4) 7-point throttle curves and (5) (including throttle hold) 7-point pitch curves
Adjustable High/Low pitch setting
3 Adjustable Idle-up conditions
Advanced Glider Menu
8 Programmable Mixes (4 linear/ (4) 5-point curves)
12 Factory-Defined Mixes: Butterfly-Elevator (2); Elevator-Flap; Chamber Mix (w/ail/ele/rdr adj.); Aileron-Flap; Aileron-Rudder; Flaperon; V-Tail; Flap Trim; Butterfly w/spoiler adj; and 4-point Offset (w/camber adj. for basic/launch/thermal/speed)
Adjustable spoiler
Adjustable Throttle Cut
Single/Dual Aileron and Flap Servo Selections
Start, Speed, Distance & Landing conditions, Adjustable Airbrake Activation
Adjustable Motor Cut
Enhanced Features:
(2) Slider Switches
(3) Rotary Dials
More Programmable Mixes
More Factory-Defined Mixes
R6014FS Receiver
TM-10 2.4GHz Transmitter Module
| ITEM PRICE: |
 |
|
| 
